PLMN codesĪll network related settings are moved under profiles, starting from RouterOS 6.41 Used to lock device to specific operator full PLMN number is used for lock consisting from MCC+MNC. Select/force mode for LTE interface to operate with Network-mode ( 3g | gsm | lte Default: 3g,gsm,lte) Max packet size that LTE interface will be able to send without packet fragmentation. Modem init string (AT command that will be executed at modem startup) Media Access Control number of an interface. Which APN profile to use for this interfaceįrequency band used in communication LTE Bands and bandwidths Some modems, that do not fully support this feature, will connect to the network but will not establish an IP data connection with allow-roaming set to no. Sub-menu: /interface lte Properties PropertyĮnable data roaming for connecting to other countries data-providers. After reboot you will find that Firmware has been downgraded.Warning: In RouterOS v7 ignore-direct-modem parameter is moved under /system routerboard modem menu If the Current Firmware version is greater than the Upgrade Firmware version, click on Upgrade button. Routerboard window will appear.Ĭheck your Current Firmware and Upgrade Firmware version.
The following steps will show how to downgrade MikroTik Firmware properly.įrom Winbox, go to System -> Routerboard menu item. If you upgraded firmware before, you also need to downgrade firmware. The system will be rebooted and after reboot you will find that your RouterOS has been downgraded. Click on Downgrade button from this window.From Winbox, go to System -> Packages menu item.Then, the file will be uploaded to MikroTik root directory Drag and drop the downloaded NPK file to this File List window.
open Winbox and go to System -> Ressources.So I decided to downgrade to the latest 6.x version, which, at the time of this post is 6.49.2.įind the architecture of the Mikrotik device OK, so after upgrading to ROS 7.1 from 6.49.1, I found out that most of my CAP-ACs randomly get disconnected.
0 kommentar(er)
